Rolls-Royce and Bentley Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
290 Posts
Discussion Starter #1
I have read the advice on testing solenoid's on the cruise control and when I put a power lead to the first main's lead in the connector ( for the solenoid) the bellows pulls in all the way.
Then when I put the power lead to the second connection (for the other solenoid) the bellows only moves a fraction ??? Should it also pull in all the way or what should the second one do ? Should it only move a little ?
The bellows is Good & is properly sealed
There is good Vacume on tick over
I have also fitted a new relay.

The car is a mid 1986 B8 ch 15608
Any help?
 
1 - 1 of 1 Posts
Top