Rolls-Royce and Bentley Forums banner

Silver Shadow - removing exterior door handles

2K views 4 replies 2 participants last post by  Urzwoo 
The allen screw is 5.5mm and accessed thru a hole in the door skin. I used a long shank bit. The acorn nut, as you noticed is easily removed since it is external. BTW: A suggestion. When replacing the inner plastic door film, I use a contractor plastic bag and 3M strip butyl chaulk strips It remains tacky and there's no problem removing the newly installed film going forward.
 
  • Like
Reactions: Urzwoo
Yes, it's designed that way so you can adjust the release rod that hits the jamb mechanism.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top