Rolls-Royce and Bentley Forums banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Pair of Rolls Royce Silver Cloud II rebuilt Aluminum Heads. These fit all 1959-1965 Silver Cloud II & III models - The aluminum heads were vatted, then spring pressures & height of the springs was checked. All valves were magnafluxed, lapped & reinstalled. Valve guides were checked. Fresh valve stem seals. Heads were milled on a CNC grinder .007/inch and finally heads were pressure tested. - These heads are ready to run . . . Heads are located in Dallas, TX - Photos available. For more information please call: (800) 900-1943 - Thanks.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.