Rolls-Royce and Bentley Forums banner

1 - 4 of 4 Posts

·
Registered
1971 Corniche
Joined
·
17 Posts
Discussion Starter · #1 ·
Hello all,
I’m hoping someone out there would be willing and nice enough to review the attached ignition switch box pictures and help me figure out the proper connection for the remaining wires.

The ones already connected to the switch box have been verified and operate correctly.

Where I’m stumped is figuring out the ones that are not connected in the attached photo.

This is 1971 Corniche right hand drive drop head (DRH10129)

Thanks
Joel CBD63510-7686-4544-9260-D3A7EAA48B14.png 89645AAA-C4AE-4CB6-9D40-3BDCB7216FDD.jpeg
 

·
Registered
1971 Corniche
Joined
·
17 Posts
Discussion Starter · #2 ·
So no one out can make “heads-or-tails” of the wires?

The only one that really has me stumped is the red/s or maybe that’s red/g wire that has been tapped with that little blue wire tap. That color isn’t on the drawing coming to the switch. The wire tap went to the RH “A” post body socket and was laid on to a purple/r cotton wrapped wire that has continuous 12v power.

Any thoughts
 

·
Registered
1971 Corniche
Joined
·
17 Posts
Discussion Starter · #4 ·
Yes it is, I just wasn’t concerned with the added wire. If I can identify the use of the original wire I’m sure I’ll be able to sort things out.
 
1 - 4 of 4 Posts
Top