[umtaliman]

Sorry, I thought I had replied to this, must not have gone through. Firstly, if you have a working key, make sure it is far away from the car. Insert the new key into the ignition and turn to position 1 (accessories). Wait 20 seconds then turn off. That's it.

 

[Tusabes]

Another option is to buy a used already cut key on eBay and try to have a locksmith recut it to try to match the profile of your key , hopefully grinding down some high points with the existing low points will work

 

[Pavel Rus]

Hello everybody. I have the same issue with key. I was able to made key via local locksmith and also found specialist who can program key in immobilizer. May be somebody of our members have broken key for Arnage and ready to sell it? I need plastic head in which I will put my metall key part, so I will have more less original look of key. I tryed to search on Ebay but there is no any items for sale for Arnage RL.

 

[Pavel Rus]

Hi folks, some update regarding my key issue. After couple month of searching I found master key from Arnage Green Label, 1999 on Ebay and bought it. I supposed that I should recut key's blade. Today I recieved key and desided to try it. So I went in garage and was very suprised that this key opens all locks on my car: doors, boot, gloves box and ignition))) But my car is Arnage Red Label, 2000. How can it be???

On picture below upper key is my genuine vallet key, other key is what I bought on Ebay

 

[alabbasi]

Well done, key programming on an Arnage does not require the Omitec scanner. Just the keyfob for the central locking.

 

[Pavel Rus]

Thank you Do you know procedure for key programming?

 

[alabbasi]

I did it with an Autel before I bought my Omitec. I just followed the prompts. It may be different from one scanner to another depending on the software.

 

[jonnyc]

Wait a minute, has no one read Pavel's last post? He buys a key off of Ebay and it just so happens that straight away it fits all of the locks on his car? What are the odds? Pavel you need to play the lottery! Am I missing something here???

Cheers!

 

[Pavel Rus]

Yes, I was absolutely suprised that the key was suitable for all locks, seems that they used limited key coding in Crew and it can be repeated from car to car)) I play lottery, but won only couple of USD)))

 

[alabbasi]

My first car was a mark 3 Cortina, I could unlock the door with a 50 pence coin.

 

[Anatoly]

Hello. My friend's key also broke, but I was able to make two new keys. It turned out better than the original, everything works. Natural wood lining, metal spacer, honda blade

 

[Jim Walters]

Nice job Anatoly. I've thought of machining up some key blanks for these out of brass sheet but if a Honda blank has the same groove pattern that makes it way easier. What Honda blank number did you use?

 

[Jim Walters]

Welcome to the forum Anatoly, you will find good accurate information here As a new member of this forum, please take a few minutes to read through "Instructions for navigating the site" and "How to reply to a discussion thread"in the FAQ section, link here:FAQ There are other topics there that you may find informative. Please note also that it is not necessary to quote a previous post in your reply if you are following the train of thought in the thread, it just clutters up the thread unnecessarily. Simply start typing your reply in the dialogue box below the last post where it says "write your reply" , do not click on "reply" (which adds the previous post as a quote) unless it is absolutely necessary to maintain continuity in the thread. Thanks, Jim.

 

[Anatoly]

I cut the grooves myself, used the Honda key as a blank

 

[Losjm]

Where are you located ? I need one of those keys

 

[Anatoly]

I am in Russia. These keys are made and given to a friend. But I can always make more keys according to the sample, or blanks and send them anywhere in the world. Any locksmith can cut a profile of secrets. Keys without a chip.

 

[Anatoly]

Приступаю к изготовлению новых заготовок для ключей Bentley. Если кому нужен ключ - пишите. Я сделаю заготовку, проверю на бентли друга, но бородки (пины, секреты, зубцы - исправьте, как правильно по английски) нужно будет нарезать по оригинальному ключу. Это сможет сделать любой мастер по изготовлению копий ключей (смотрите фото). Или нужно прислать мне оригинальный ключ. В этом случае могу переставить чип в новый. Также чип с оригинального ключа можно переставить самостоятельно в замок зажигания и тогда проблема с нечипованными ключами исчезнет. Еще вариант установить чистый чип и запрограммировать его у специалиста. Но я не знаю какой нужен стандарт чипа, буду счастлив, если подскажете. И извините за мой английский! )))

 

[knyphausen56]

I would love a blank when they are ready to be shipped.

 

[Anatoly]

I hope they will be ready on February 1. I'll report here

 

[Anatoly]

Sorry, I seem to have inserted an untranslated text

I'm starting to manufacture new blanks for Bentley keys. If anyone needs a key, write. I will make a blank, check on a friend's Bentley, but the beards (pins, secrets, teeth - correct how to speak English correctly) will need to be cut according to the original key. This can be done by any master for making copies of keys (see photo). Or you need to send me the original key. In this case, I can move the chip to a new one. Also, the chip from the original key can be rearranged independently into the ignition lock and then the problem with non-chipped keys will disappear. Another option is to install a clean chip and program it with a specialist. But I do not know what the chip standard is, I will be happy if you tell me. And sorry for my English!)))