Rolls-Royce and Bentley Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi,
Does anybody know the procedure on topping up the hydraulic brakes on a 95 Bentley Turbo. Is there a special tool needed as it looks like a different system compared to my previous 1989 Turbo. Thanks for any help.

Mark
 

·
Registered
Joined
·
244 Posts
Hi,
you juste need the right open ended spanner, and use the right order. :wink:
 

·
Registered
Joined
·
221 Posts
1995 turbo r brake top up

The bottle og mineral oil should have tube with it, if you take the plugof the tanks the tube is inserted in then squeeze the fluid in looking at the green on the float rising, needs to be thin line of green above the top level mark, worth hitting tanks whilst filling to make sure floats aren't sticking
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #4 ·
Thanks guys, just done that and topped it up......

Mark
 

·
Registered
Joined
·
1,558 Posts
Hi if you having to top it up there is a reason for this
Either a leek or your pads are getting low Have a Look even if it has had a service
Usual culprits are the pump housing seals
:)
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #6 ·
bentleyman22 said:
Hi if you having to top it up there is a reason for this
Either a leek or your pads are getting low Have a Look even if it has had a service
Usual culprits are the pump housing seals
:)
Hi bentleyman,

There is a slight leak but doesnt seem to be all the time just now and again which is a bit strange.
 

·
Registered
Joined
·
1,558 Posts
Hi
Do you know where it is coming from?
Leaks get worse in time so must be done asp
If there is a leek from the pumps it can run down the back of the engine and in to the Bell Housing
Where it can sit and only come out when you’re driving so you don’t see the extent of the leak
Don’t worry nothing is hard as long as you have some no how

Michael
 
1 - 7 of 7 Posts
Top