Rolls-Royce and Bentley Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi looking for some advice/help I have a 1982 rolls Royce corniche convertible it has been standing a while however It is running, pretty much everything electrical is working but it will not engage gear I have taken the rod off from the actuator to the gearbox, when I manually engage gears the gearbox is fine I have power down to the circuit breaker and I have some power to the two plugs by the transmission tunnel that lead to the actuator this seems to be an intermittent fault as the other day it was all working can anybody point me in the right direction please
 

·
Registered
Joined
·
91 Posts
HarryA1 Have you tried pressing the red reset button on the fuse board? I will be back at the house later today and will look up the circuit for you then.

Jim
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Jim I have live to the breaker and I have pressed the reset thank you very much for any help you can give me
 
1 - 4 of 4 Posts
Top