Rolls-Royce and Bentley Forums banner

Corniche 1978, DRG 32869, in Ashland, OR

2K views 5 replies 4 participants last post by  rollsroyceroamer 
#1 ·
Please advise as to where I would be able to obtain:

1. The G valve repair kit UD 4820 X2

2. Valley cover gasket for engine

Thanks

rollsroyceroamer@gmail.com
 
#4 ·
Valley cover seal: Not a convential "gasket". It is a silk thread. This seal has to be consistent in thickness. The hydraulic pumps mount to the "tappet cover" and therefore any irregularities in this could offset the pump rod-to-cam-to pump body measurement.
Try Alber's in Zionsville, IN Sold by length.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top