| View previous topic :: View next topic |
| Author |
Message |
bobo Member
Joined: 05 Feb 2010 Posts: 21 Location: United States
|
Posted: Fri Feb 26, 2010 11:00 am Post subject: Hubcap help |
|
|
I was polishing up the hubcaps on my SCII and found on 2 of hubcaps the finish has become rater dull, especially in the outer valley of hubcap and wondering how best to polish them up (I used Mothers Chrome polish)
are the hubcaps nickel plated, or can they just be machine polished?
also how do you remove the paint/beauty rings for repainting? are the clips that hold the paint ring on (in the back) reusable? _________________ a moment enjoyed is never wasted... |
|
| Back to top |
|
 |
Leho Member
Joined: 08 Aug 2007 Posts: 67 Location: Ontario, Canada
|
Posted: Mon Mar 01, 2010 12:22 pm Post subject: |
|
|
The wheel discs (UG4363) are chromium plated. The painted rings (UG1559) need to be removed for painting. The spire nuts (UG4158) need to be removed carefully. If they are not damaged during removal they can be reused. These are sheet metal locking nuts with tabs. If you don't break the tabs you should be OK.
Leho |
|
| Back to top |
|
 |
|
|
You cannot start new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Copyright © 2006 RollsRoyceForums.com
RollsRoyceForums.com is in no way affiliated with Rolls-Royce plc, BMW AG, Rolls-Royce Motor Cars Limited, Bentley Motors Ltd., or Volkswagen AG.
Rolls-Royce, the "RR" logo, the radiator grille, and the Spirit of Ecstasy are registered trade marks exclusively licensed to Rolls-Royce Motor Cars Limited. Bentley is a registered trademark of Bentley Motors Ltd.
Powered by phpBB © 2001, 2005 phpBB Group - Design: niedermayr.cc for phpbbstyles.eu Guild Wars © 2004 ArenaNet, Inc. All rights reserved. ArenaNet, Arena.Net and the ArenaNet logo are trademarks or registered trademarks of NCsoft Corporation in the U.S. and/or other countries.
|