Rolls Royce tools for sale - Rolls-Royce and Bentley Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 19 (permalink) Old 03-03-2016, 05:51 AM Thread Starter
Senior Member
 
Kelly Opfar's Avatar
 
Join Date: Jun 2013
Location: Orem, Utah
Posts: 59
Rolls Royce tools for sale

I have many new Rolls tools available. First up is a socket for removing the brake pump. This is machined from 1 piece of high-strength stainless steel. $80
Next is a stainless socket for removing the nut on the front of the crank hub. $80.
Also, a similar stainless socket for removing the castle nut on the top of the upper Balljoint $80
I have a puller for removing the crank hub. Comes with grade 8 hardware and thick washers. $80
I also have a puller for removing the yoke on the rear drive hub. $80. Or $55 if you buy the crank hub puller too. They use the same threaded shaft.
All of these tools can individually ship in a USPS Small Flat Rate Shipping Box for $6.85.
Attached Images
File Type: jpg Brake pump 1.jpg (137.0 KB, 49 views)
File Type: jpg Brake pump 2.jpg (150.5 KB, 46 views)
File Type: jpg crank nut socket 1.jpg (200.0 KB, 44 views)
File Type: jpg crank nut socket 2.jpg (214.5 KB, 41 views)
File Type: jpg Balljoint socket 1.jpg (245.3 KB, 40 views)
File Type: jpg Balljoint socket 2.jpg (261.1 KB, 38 views)
File Type: jpg crank hub puller 1.jpg (208.6 KB, 43 views)
File Type: jpg crank hub puller 2.jpg (240.4 KB, 45 views)
File Type: jpg yoke puller 1.jpg (274.9 KB, 43 views)
File Type: jpg brake hub puller.jpg (105.7 KB, 52 views)
Kelly Opfar is offline  
Sponsored Links
Advertisement
 
post #2 of 19 (permalink) Old 03-04-2016, 04:23 PM Thread Starter
Senior Member
 
Kelly Opfar's Avatar
 
Join Date: Jun 2013
Location: Orem, Utah
Posts: 59
I also have a hub puller for SZ series Spirits and Spurs that have Lobro shafts. It is $80 or $55 if you buy the crank hub puller too. They take the same threaded shaft. This is made from a high-strength stainless alloy and includes grade 8 hardware and thick washers.
I can be contacted directly at dooskoop@hotmail.com or send me a PM through this site.
Attached Images
File Type: jpg SZ hub puller 2.jpg (245.9 KB, 15 views)
File Type: jpg SZ hub puller.jpg (266.0 KB, 21 views)
Kelly Opfar is offline  
post #3 of 19 (permalink) Old 03-04-2016, 04:29 PM Thread Starter
Senior Member
 
Kelly Opfar's Avatar
 
Join Date: Jun 2013
Location: Orem, Utah
Posts: 59
Here is a pic of the Lobro hub puller in situ.
Attached Images
File Type: jpg SZ hub puller in situ.jpg (193.4 KB, 38 views)
Kelly Opfar is offline  
 
post #4 of 19 (permalink) Old 03-05-2016, 09:49 AM
Senior Member
 
Join Date: Jan 2015
Posts: 281
Kelly,
Beautiful tools! Don't you have the 2 castellated nuts for removing the subframe mounts?
As for your SZ Lobro puller, I constructed one out of an old, mangled, hub (the Woodruff key shred).
Will post a pic later.
JP_Corniche is offline  
post #5 of 19 (permalink) Old 03-05-2016, 02:41 PM Thread Starter
Senior Member
 
Kelly Opfar's Avatar
 
Join Date: Jun 2013
Location: Orem, Utah
Posts: 59
Jean-Pierre, I do have the subframe sockets available. $150 pair.
For those who have never changed the the subframe mounts, the mount must be held still on one end with a castle socket and the slotted nut is tightened on the other side with another castle socket.
Attached Images
File Type: jpg subframe mount sockets.jpg (240.0 KB, 23 views)
Kelly Opfar is offline  
post #6 of 19 (permalink) Old 03-07-2016, 05:05 PM
Senior Member
 
Join Date: Jan 2015
Posts: 281
Kelly,
I still have to figure out how to do exactly what you describe, it is beyond my imagination...
How do those tools look like from the other side?
How heavy (to figure out shipping costs).
Cheers,
JP
JP_Corniche is offline  
post #7 of 19 (permalink) Old 03-07-2016, 11:18 PM
Senior Member
 
Join Date: Apr 2012
Location: Wexford, Ireland
Posts: 375
Hi Kelly, I would like to buy one of your brake pump sockets. How do I order, Thanks, Larry
shadow 11 is offline  
post #8 of 19 (permalink) Old 03-08-2016, 02:28 PM Thread Starter
Senior Member
 
Kelly Opfar's Avatar
 
Join Date: Jun 2013
Location: Orem, Utah
Posts: 59
Suspension mount tools

Quote:
Originally Posted by JP_Corniche View Post
Kelly,
I still have to figure out how to do exactly what you describe, it is beyond my imagination...
How do those tools look like from the other side?
How heavy (to figure out shipping costs).
Cheers,
JP
Here are a few pics to help visualize how the mount and tools work together.
The weight is less than two lbs. There is a US Post Office international priority mail service for most European countries that is around $34 for a small package.
Attached Images
File Type: jpg frame mount.jpg (224.2 KB, 42 views)
File Type: jpg frame mount 2.jpg (203.5 KB, 43 views)
File Type: jpg frame mount 3.jpg (191.5 KB, 45 views)
Kelly Opfar is offline  
post #9 of 19 (permalink) Old 09-15-2016, 05:06 PM Thread Starter
Senior Member
 
Kelly Opfar's Avatar
 
Join Date: Jun 2013
Location: Orem, Utah
Posts: 59
I now offer a liner puller design that works for all V8 Clouds, Shadows and Spirit/Spur variants.
The first pic shows a block with one liner and one set of studs installed.
There is a hard anodized aluminum alignment fixture used to make sure the liner doesn't get caught on the upper tube while being withdrawn. I made the bore of the upper tube as small as possible to maximize the wall thickness.
The upper tube has flutes milled to clear the head studs.
The lower extractor plate has a flat milled to clear any obstructions.
Under the top nut there is a a series of washers and a roller thrust bearing for smooth operation.
This extractor is $220. It can ship inside the US for $18.75 in a USPS Priority Large Flat Rate Box or almost any international destination for $96 or less.
International flat rate shipping is capped at 20 pounds and this kit weighs about 13lbs. so a few other items could be shipped in the same box for no extra charge.

Attached Images
File Type: jpg IMG_5027.JPG (109.6 KB, 27 views)
File Type: jpg IMG_5028.JPG (110.2 KB, 27 views)
File Type: jpg IMG_5029.JPG (120.3 KB, 29 views)
File Type: jpg IMG_5032.JPG (118.5 KB, 31 views)
File Type: jpg IMG_5036.JPG (107.0 KB, 28 views)
File Type: jpg IMG_5039.JPG (129.1 KB, 26 views)
File Type: jpg IMG_5043.JPG (178.5 KB, 28 views)
Kelly Opfar is offline  
post #10 of 19 (permalink) Old 09-16-2016, 06:08 AM
Senior Member
 
Join Date: Jun 2016
Location: FR
Posts: 835
Very impress by your tools Kelly. Such a quality and prices seems affordable and competitive.

Congratulations
Jean

Continental R . 1997
Jean7 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Rolls-Royce and Bentley Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.

SEO by vBSEO 3.6.1